« previous next »
Pages: [1]

Author Topic: 81 fl250 help with crank seals  (Read 3311 times)

greycar

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
81 fl250 help with crank seals
« on: April 04, 2016, 02:48:46 PM »
bought 81 FL 250 . Almost showroom condition. I need to change crank seals and am pretty mechanicaly inclined. what am I in for ? any tips and suggestions.. Is it a pretty easy job?
Logged

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1082
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: 81 fl250 help with crank seals
« Reply #1 on: April 12, 2016, 07:21:46 AM »
You'll need a clutch puller and flywheel puller to get to them. I have replaced crank seals by driving self tapping screws in then pulling out. Put some Vaseline inside new seals to lube until the oil can get to them.
Logged

Rj1

  • Newbie
  • *
  • Posts: 24
  • Karma: 0
    • View Profile
Re: 81 fl250 help with crank seals
« Reply #2 on: May 28, 2016, 10:42:30 AM »
On the FL250 you have to spilt the case to get at the seals on the FL350 it's much easy'er to get at them . If your going to split the case check your bearings it's a good time to change them to if you have any play in them
Logged
Pages: [1]
« previous next »