Author Topic: Got a screw stuck in the clutch help it bent as i did not use a grade 8 bolt ???  (Read 4217 times)

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Once you take the clutch apart, the stem will still be there. I would start with trying to use a puller bolt. You can just press on the bolt that is in there. If the clutch strips out, then take it apart. You will then have to cut the stem off leaving the bolt so you can use vice grips on it or weld a nut on it to use as a head.

camz281974

  • Newbie
  • *
  • Posts: 6
  • Karma: 1
    • View Profile
Same thing happened to me years ago. Ended up carefully drilling and tapping the bent pin as not to damage the crank threads and using a slide hammer to remove the piece. Never made that mistake again using a grade 5 bolt. Good luck.

Fl350clutch

  • Newbie
  • *
  • Posts: 25
  • Karma: 0
    • View Profile
So i took the motor out and i am about to do the hydraulic pressure procedure see if it works