Author Topic: Which case splitter/puller to buy?  (Read 1869 times)

ttyR2

  • Newbie
  • *
  • Posts: 47
  • Karma: 0
    • View Profile

hoodlum

  • Administrator
  • Hero Member
  • *****
  • Posts: 857
  • Karma: 11
    • View Profile
Re: Which case splitter/puller to buy?
« Reply #1 on: June 10, 2012, 08:20:30 AM »
Refresh my memory...Been a while since I messed with a 350....Where are the holes on the cases located to attach the splitter too?

odypilots

  • Sr. Member
  • ****
  • Posts: 345
  • Karma: 6
    • View Profile
    • Downhomeracing.com/opr
Re: Which case splitter/puller to buy?
« Reply #2 on: June 10, 2012, 03:01:48 PM »
I have no advice for you, unfortunately. Over the years I've often thought of adding one, but somehow haven't.
The usual 'my two cents' disclaimer applies. :)

ttyR2

  • Newbie
  • *
  • Posts: 47
  • Karma: 0
    • View Profile
Re: Which case splitter/puller to buy?
« Reply #3 on: June 10, 2012, 10:33:03 PM »
Same holes that hold the side covers on.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Which case splitter/puller to buy?
« Reply #4 on: June 11, 2012, 11:19:56 AM »
The one I use is a Motion Pro. If looking at an unknown brand, I would search the net for those who have used it on anything and if it bent. Bending would be the problem due to the leverage put on the parts due to the way they work. The bolts that thread into the case will be pretty far away from the crank on the one side.