Author Topic: rims  (Read 2524 times)

air time

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
rims
« on: January 21, 2011, 12:09:33 PM »
Where can I get the rims like John C has on his long travel 350?

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: rims
« Reply #1 on: January 21, 2011, 02:35:02 PM »
His rear hubs were changed from 4 on 130 to 4 on 110: http://aftershockmotorsports.com/cart/index.php?main_page=product_info&cPath=1_21&products_id=148
His front hubs were changed from 4 on 110 to 1 on 144 because 10" front wheels are more common in that size. There is not an easy solution for that at the moment. However, 4 on 110 is a common pattern in 12" rims.

I have a new set of 4 12" wheels similar to the ones on his with 23" tires mounted on them. The rears are about the same height as stock, the fronts are a bit taller than stock. I normally run a taller tire in the front. They would require the rear hubs be swapped out with the ones I linked to.

air time

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: rims
« Reply #2 on: January 21, 2011, 05:08:16 PM »
Thanks  will the hubs fit the pilot or do they make ones that will?

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: rims
« Reply #3 on: January 22, 2011, 06:40:10 PM »
No, they won't fit a Pilot. The Pilot has a different spline count. I can make up a set of wheel adapters for the Pilot. What is nicer about replacing the entire hub is that adapters add width too.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: rims
« Reply #4 on: February 28, 2011, 02:58:19 PM »
Here are those wheels mounted. They narrowed the 350 up by 1/2" per side. So with 1/2" thick adapters on a Pilot, you would end up back at the original width. The spun wheels commonly used add 3/4" per side.

http://aftershockmotorsports.com/Honda-FL350R-Odyssey/Wheels-Tires/4_Spoke_Wheel_Tire_Package