Author Topic: FL350 rear hubs........  (Read 3136 times)

MrFoto

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
FL350 rear hubs........
« on: September 15, 2010, 10:25:09 AM »
Can anyone tell me the diam of the shaft and spline count for an FL350R rear hub? And or what other ATVs might share the same spline size and count. Looking to change the bolt pattern on one.

gmcjimmy4x4

  • Newbie
  • *
  • Posts: 35
  • Karma: 0
    • View Profile
FL350 rear hubs........
« Reply #1 on: December 26, 2010, 08:43:16 PM »
i found that the hubs from some of the old 3 wheelers are interchangeable. I have a set for mine. I think they are from an 85? honda 200sx i think. They will change the rear to a 4/110 pattern.

EAGLES17

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
FL350 rear hubs........
« Reply #2 on: January 18, 2011, 08:26:40 PM »
400ex hubs will fit changes bolt pattern to 4/110 you should have the inboard side of hub machined for the seal to ride on .

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
FL350 rear hubs........
« Reply #3 on: May 17, 2011, 03:53:05 PM »
EAGLES17 is correct that the hubs need to be machined for the seals. The hubs used to be pretty cheap new. Now the aluminum Dura Blue hubs are cheaper for a pair. They also need to be machined. Some have added spacers to space the hub out, but then the cotter pin won't go back in the nut.