Author Topic: ticking noise (Read 1678 times)

emad76 · « **on:** January 24, 2007, 04:42:14 PM »

hi all am new in here, when putting into reverse gear and start moving i hear this ticking noise from the rear wheel, so what should i change, also would like to know how to drain engine oil and how much i should put in thanks. am from Egypt by the way if anyone want an off road experience beside the pyramids just let me know

Odyknuck · « **Reply #1 on:** January 24, 2007, 04:54:08 PM »

The Ticking noise is one of your CV joints. Usally its one of the wheel ends. The trans has a fill bolt on the side. Fill untill it starts to come out of the fill hole.

turbotexas · « **Reply #2 on:** January 25, 2007, 02:39:02 AM »

Is this a pilot fl400 or a odyssey fl350??? engine oil or transmission oil???
Welcome!!!

Odyknuck · « **Reply #3 on:** January 25, 2007, 10:03:27 AM »

After I re read you post I realized it was the counter balance case in the motor you are referring to. It has a 10MM plug in the bottom accessible thru the skid plate. Remove it and fill from the filler on the seat end of the motor. When oil comes out of the overflow on the bottom stop pouring.

emad76 · « **Reply #4 on:** January 25, 2007, 02:56:45 PM »

i have pilot Fl400, I wanted to ask how to change the transmission oil, any drain for it , it says put 0.75 ml of oil that's for the transmission , do I have to put any oil i mean in the engine and how many

emad76 · « **Reply #5 on:** January 25, 2007, 02:59:14 PM »

now I got it thx to all