1
For Sale: / Honda Pilot FL400 new front fenders for sale.
« on: April 08, 2009, 08:19:56 AM »
Honda Pilot FL400 new front fenders for sale. Front fenders are new and have never been installed. $150 each plus shipping.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
For Sale: / Protools model 105 heavy duty bender
« on: April 07, 2009, 05:39:15 PM »
I've got a pro-tools heavy duty (5/8" arms and not 1/2" arms) with a 240 degree 1-3/4 OD tubing die which allows for complete 180 degree bends.
This is the mac daddy of manual benders. It comes complete with the stand and degree ring. Bolt this thing to the floor and start bending.
$600 plus shipping (this die alone is over $250)
The heavy duty bender setup new from pro-tools is $750 plus shipping, and that price doesn't include the 240 degree die.
This thing is heavy and shipping will not be inexpensive.
This is the mac daddy of manual benders. It comes complete with the stand and degree ring. Bolt this thing to the floor and start bending.
$600 plus shipping (this die alone is over $250)
The heavy duty bender setup new from pro-tools is $750 plus shipping, and that price doesn't include the 240 degree die.
This thing is heavy and shipping will not be inexpensive.
3
For Sale: / 10 1/2" RH thread heim joints and hardware
« on: April 07, 2009, 05:31:21 PM »
10 1/2" RH thread heim joints and hardware. 20 2" long grade 8 bolts, 40 jam nuts, 20 lock washers, 20 flat washers, and 20 nylock nuts.
$200 shipped to your door in the US.
$200 shipped to your door in the US.
4
For Sale: / Honda 400EX front brake calipers, etc
« on: April 07, 2009, 05:29:06 PM »
Honda 400EX front brake calipers, master cylinder, lever and brake lines.
Shipped to you door for $80 in the US.
Shipped to you door for $80 in the US.
5
For Sale: / Honda Odyssey FL350 shifter and cables
« on: April 07, 2009, 05:26:52 PM »
Honda Odyssey FL350 shifter and cables. There is yellow overspray on them and the cables are hard to move, but the shifter shifts good. These are no longer available from honda, but weed can get new cables if you need them.
$75 shipped in the US.
$75 shipped in the US.
6
For Sale: / Honda Odyssey FL250 "Clymer manual"
« on: April 07, 2009, 05:25:03 PM »
This book is much better than the factory service manual. This is the "performance edition" which has tons of tip and tricks to get the most out of you odyssey. $25 shipped in the US.
7
For Sale: / Honda Pilot FL400 OEM maintenance manual
« on: April 07, 2009, 05:22:57 PM »
Maintenance manual from Honda for the pilot. This manual is bound in a 3 ring binder. $18, shipped in the US.
8
For Sale: / FL250 gearbox and driven clutch.
« on: April 07, 2009, 05:14:52 PM »
Transmission needs seals, but otherwise is ok. Drive needs serious cleaning in order to be functional. $50 plus shipping.
9
For Sale: / Honda Pilot FL400 rear shocks---SOLD
« on: April 07, 2009, 05:13:39 PM »
Pilot stock rear shocks. They are in decent shape. $85 shipped in the US
10
For Sale: / Fox air shocks, 8.5" stroke
« on: April 07, 2009, 05:11:20 PM »
I have a set of Fox air shocks. 8.5" stroke. Shocks have been reconditioned with new fox shock oil, and a fresh nitrogen charge, and new schrader valves as well. Currently the rebound and compression dampening shim stacks are set to 40/60 and are charged with 250 PSI nitrogen.
These shocks sell for over 200 each new, and these don't have much use at all. $300 plus shipping.
These shocks sell for over 200 each new, and these don't have much use at all. $300 plus shipping.
11
For Sale: / Honda Pilot FL400 rear caliper/brakes complete
« on: April 07, 2009, 04:26:38 PM »
I have a nice pilot rear caliper with the e-brake hardware, mounting bracket, ebrake handle, and cable.
These are discontinued from honda. I want $200, shipping in the US included.
These are discontinued from honda. I want $200, shipping in the US included.
12
For Sale: / Galfer stainless steel braided brake lin kit for FL400 pilot
« on: April 07, 2009, 04:20:52 PM »
I've got a set of galfer stainless steel braided brake lines with a red poly coating for the pilot. The lines replace the old weak stock lines. Included with the kit are lines for the front and rear. These retail for $195 I'll take $150 which includes shipping.
13
For Sale: / FL400 honda pilot powerbloc clutch
« on: April 07, 2009, 04:12:15 PM »
This clutch is brand new and never even mounted. they are almost $300 from atv racing. I want $250 and I'll pay shipping in the US.
14
For Sale: / 2007 phazer engine "car kit" complete
« on: April 07, 2009, 04:08:36 PM »
Last year I bought a 2007 yamaha phazer 500cc twin 80 hp 4 stroke engine to put into my pilot. I have run out of time and interest for the project, and I'm selling everything that was involved with it.
Now I'm listing the engine. I was told it has 1700 miles on it. One of the engine mounts in the front was cracked, but has been repaired. It complete complete with throttle bodies, intake tubes, fuel pump, wiring harness, digital display, exhaust, and stuff I'm sure I am missing.
I'll do what I ca to accommodate shipping, but it wont be cheap I'm guess that by the time insurance is added, and 3 boxes are shipped it wil cost in the neighborhood of $150 for shipping.
I will take $1700 for the "engine kit" plus shipping.
I'll get pictures posted later.
Now I'm listing the engine. I was told it has 1700 miles on it. One of the engine mounts in the front was cracked, but has been repaired. It complete complete with throttle bodies, intake tubes, fuel pump, wiring harness, digital display, exhaust, and stuff I'm sure I am missing.
I'll do what I ca to accommodate shipping, but it wont be cheap I'm guess that by the time insurance is added, and 3 boxes are shipped it wil cost in the neighborhood of $150 for shipping.
I will take $1700 for the "engine kit" plus shipping.
I'll get pictures posted later.
15
For Sale: / Custom pilot input shafts.
« on: April 07, 2009, 03:58:32 PM »
I had custom input shafts machined for my pilot project, and since I am no longer pursuing it they aren't doing me any good. The shafts are 16" overall with 10" of usable input shaft for the driven clutch.
I paid a hefty sum to have these machined to exactly fit the honda pilot transmission. I needed a new shaft with an industry standard size instead of the honda specific splines. With the 1" shaft I could use a wide variety of snowmobile clutches with my conversion.
Input shaft 16" overall, 10" of usable shaft for the driven clutch that is 1" in diameter with a 1/4" keyway.
This is exactly waht you need if you are planning on doing a sled engine conversion on your pilot. I have 2 of these and I want $250 each which will include shipping.
These parts are beautifully machined, and cost way more to have done than I'm asking.
I paid a hefty sum to have these machined to exactly fit the honda pilot transmission. I needed a new shaft with an industry standard size instead of the honda specific splines. With the 1" shaft I could use a wide variety of snowmobile clutches with my conversion.
Input shaft 16" overall, 10" of usable shaft for the driven clutch that is 1" in diameter with a 1/4" keyway.
This is exactly waht you need if you are planning on doing a sled engine conversion on your pilot. I have 2 of these and I want $250 each which will include shipping.
These parts are beautifully machined, and cost way more to have done than I'm asking.