Honda Odyssey and Pilot Forum
General Category => General Discussion => Topic started by: tracksusa on March 02, 2009, 10:35:32 AM
-
im out of town for a while wanting to buy a new race seat that I found on creig list to repace my old one for a little softer on the cheeks. can anyone give me the width I can get buy with on the 350fl.
-
just put the seat in had to make some cross braces for the bottom but worked. also had to put in some spacers for the for/rev handel to move it out about 1/2". Will post pictures later. looks like just about any seat will be able to work, if your looking for a little bit but padding for the ride. Got mine off ebay for 120$
-
Remember that anything with a heat shield built into the seat will have to have a firewall or other feature installed to kepp the back of the seat from melting.
The front mount is 16-1/4 center to center, and the rear mounts are 17-1/4" c to c. The seat at the widest point is 19" give ro take a half inch.
-
front view
-
under seat view
-
working on the heat shield as we speak