Author Topic: 4 on 110 rear hubs  (Read 3307 times)

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1027
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
4 on 110 rear hubs
« on: December 11, 2008, 04:30:48 AM »
I am looking to be making a batch of rear hubs with 4 on 110 pattern to fit the FL350. The cheapest option widens the machine by about 1" per side. I can also do an aluminum hub that does not widen the machine. I am thinking about trying a set of 14" wheels with Blizzak 23" tall tires. The wheels are 4" backspacing so they would be the same width as 3+5 Douglas on stock hubs when used with the +1 hubs.
« Last Edit: January 10, 2009, 08:47:53 AM by LiveWire »

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1027
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: 4 on 110 rear hubs
« Reply #1 on: January 31, 2009, 03:48:14 PM »
Aluminum hubs with stock offset, 4 on 110 pattern are in progress. Unlike some other options that have been available in the past, these will 1) still allow the cotter pin in the nut. 2)  have the integrated ring for the seal to ride on.

dghal

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: 4 on 110 rear hubs
« Reply #2 on: March 26, 2009, 07:34:56 AM »
yes,

it seems like there are so many 4/110 rims out there and few 4/130 

 how did they come out?

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1027
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: 4 on 110 rear hubs
« Reply #3 on: March 26, 2009, 03:36:53 PM »
They turned out good. They are $199 for the hubs and outer seals 48 state shipped.