Fl350 no spark

[87fl350]

No voltage coming off of my stator.  I tested all the wires coming off to ground and none had voltage.  I'm assuming the only possibility would be a bad stator?  Just wondering everyone's thoughts. 

[LiveWire]

Were you testing this using the pull rope or the electric starter? I ask because a very common problem is when the starter starts going bad, it turns over full speed, but sucks all the power away from the stator resulting in no spark.

[87fl350]

Thank you for the reply.  I tried both.  No spark at plug pulling or using the starter.  Is there a way to ohm out the stator so if its bad I can order a new one before I tear it apart?  I understand how to use a meter just not sure what wires to olhm.  If I remember right there are 3 yellows and a green.  Then a red and a black?  Or something close to that.  I was unable to find a diagram.  I tested voltage off of all the wires with the starter... maybe I will try testing for voltage off the wires with the pull start.  I am just looking for a way to confirm I fried the stator before I tear it apart.  Thank you for your time.

[LiveWire]

There may be resistance values listed in here: https://drive.google.com/file/d/0B851Fdu_42hLdnRFSU10Y2FSb3V0NThNVVhfc094Zw/view