Poll

front ball joints

1
0 (0%)
2
0 (0%)

Total Members Voted: 0

Author Topic: 350 odyssey  (Read 2699 times)

roadrash1968

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
350 odyssey
« on: June 30, 2007, 05:43:39 AM »
does any one know of a way to replace the ball joints on the J-arms or where to get new ones. thought about going to a machine shop to have old joint drilled out ,if at all possible.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1038
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: 350 odyssey
« Reply #1 on: June 30, 2007, 12:20:53 PM »
I built a fixture for doing just that. It uses the same ball joints as used in my A-arm conversion. After making the jig, I decided it was too much effort, therefore too expensive vs. just getting used arms. Now used arms with good ball joints are getting rare and may start doing it again.