Author Topic: Front Trailing Arm Bushing and Seal Set  (Read 1238 times)


  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Front Trailing Arm Bushing and Seal Set
« on: February 06, 2012, 07:24:17 PM »
Does anybody have specs on the front bushings and seals.  After shock has them but at $200.00 I will try matching them up or maybe someone here has matched them up.  Perhaps silicone bushings would last longer. What are your thoughts.


  • Administrator
  • Hero Member
  • *****
  • Posts: 857
  • Karma: 11
    • View Profile
Re: Front Trailing Arm Bushing and Seal Set
« Reply #1 on: February 07, 2012, 05:18:06 AM »
Scilicone will not last...The actual bushing is made of metal...The only thing that is soft material is the seal for the bushing...I had some machined locally a few years ago,and spent more than $200 to have it done....You probably will too unless you have a real close friend with a machine shop....Also,keep in mind that the j-arms sometimes wear as well,and even with new bushings,you may still have a little play in the front end....The only option there is to have them built up and re-machined down....