Author Topic: will a MOSSBARGER bolt on Intake Manifold fit a stock carb  (Read 2572 times)

joe123456789_2

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
will a MOSSBARGER bolt on Intake Manifold fit a stock carb
« on: March 07, 2011, 07:39:52 AM »
will the MOSSBARGER  bolt on Intake Manifold 32mm or 34mm fit a stock Honda fl250 carburetor i need to know because my intake cracked  and i don't want to spend 80 dollars on a stock replacement on ebay i would rather spend 65$ on MOSSBARGER  bolt on Intake Manifold its cheaper
so it would be nice to know soon  :(

hoodlum

  • Administrator
  • Hero Member
  • *****
  • Posts: 857
  • Karma: 11
    • View Profile
Re: will a MOSSBARGER bolt on Intake Manifold fit a stock carb
« Reply #1 on: March 07, 2011, 02:23:18 PM »
Quote from: "joe123456789_2"
will the MOSSBARGER  bolt on Intake Manifold 32mm or 34mm fit a stock Honda fl250 carburetor i need to know because my intake cracked  and i don't want to spend 80 dollars on a stock replacement on ebay i would rather spend 65$ on MOSSBARGER  bolt on Intake Manifold its cheaper
so it would be nice to know soon  :(


I don't think the stock carb is a 32mm....If it's not,then no,it won't work...The sleeve will be too big for the carb,and an air leak will soon follow....If there is just $15 difference,it wouldn't be wise to try to save that much just to find out it won't work....
Hoodlum

joe123456789_2

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
re will a MOSSBARGER bolt on Intake Manifold fit a stock car
« Reply #2 on: March 07, 2011, 03:37:29 PM »
thank you and its supposed to be 29mm thank you again

hoodlum

  • Administrator
  • Hero Member
  • *****
  • Posts: 857
  • Karma: 11
    • View Profile
will a MOSSBARGER bolt on Intake Manifold fit a stock carb
« Reply #3 on: March 07, 2011, 04:14:16 PM »
I think some of the cr250 intakes will work on the fl250...I would bet they would be cheaper too....

girth first

  • Jr. Member
  • **
  • Posts: 94
  • Karma: 1
    • View Profile
will a MOSSBARGER bolt on Intake Manifold fit a stock carb
« Reply #4 on: March 07, 2011, 09:07:26 PM »
stock carb is 28mm on the fl250

joe123456789_2

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
re will a MOSSBARGER bolt on Intake Manifold fit a stock car
« Reply #5 on: March 09, 2011, 08:41:28 AM »
thank you i didn't know that