Author Topic: Cadman flips his 350 Odyssey  (Read 1630 times)

odypilots

  • Sr. Member
  • ****
  • Posts: 345
  • Karma: 6
    • View Profile
    • Downhomeracing.com/opr
Cadman flips his 350 Odyssey
« on: November 02, 2010, 04:14:54 PM »
Livewire, Cadman, and I took a trip to Silver Lake Sand Dunes in Michigan. I took my GoPro HD video recorder to get some action. Cadman came through, driving of a ledge and nosing in. He was OK except for a stiff neck. The buggy damage was a broken rear fender and flag mount.

http://www.youtube.com/watch?v=y25XOZEARzk
The usual 'my two cents' disclaimer applies. :)

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1027
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Cadman flips his 350 Odyssey
« Reply #1 on: November 08, 2010, 08:04:08 AM »
You asked if my front end pushes the front wheels forward. I said no, they are 4" wider than Pilot stock arms. However, due to the rake, the front wheels are moved forward with the higher ride height and especially at full droop.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1027
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Cadman flips his 350 Odyssey
« Reply #2 on: November 08, 2010, 08:09:11 AM »
With my 13" of travel minus the stock 4", the wheels would be 9" lower. I believe off the top of my head, the rake is 15 degrees. Sin 15 * 9" would put the wheels over 2" farther forward at full droop.

odypilots

  • Sr. Member
  • ****
  • Posts: 345
  • Karma: 6
    • View Profile
    • Downhomeracing.com/opr
Re: Cadman flips his 350 Odyssey
« Reply #3 on: November 09, 2010, 02:51:40 AM »
10-4.
The usual 'my two cents' disclaimer applies. :)