Author Topic: Rear Wheel toe-in..toe-out  (Read 2134 times)

slk

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Rear Wheel toe-in..toe-out
« on: September 08, 2013, 02:47:39 PM »
What is the easiest way to adjust the toe-in and out on the FL350. Is it a pretty simple procedure???

Thanks
Steve

hoodlum

  • Administrator
  • Hero Member
  • *****
  • Posts: 857
  • Karma: 11
    • View Profile
Re: Rear Wheel toe-in..toe-out
« Reply #1 on: September 08, 2013, 09:33:22 PM »
If I remember correctly, the large heim at the front of the trailing arm can be threaded in or out? This would adjust toe to a certain extent....
Hoodlum
« Last Edit: September 08, 2013, 09:36:08 PM by hoodlum »

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1077
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Rear Wheel toe-in..toe-out
« Reply #2 on: September 09, 2013, 09:38:25 AM »
The threads affect it a little. You can get a bigger gain by adding/removing washers from behind the heims. There are two washers to start with. One has a groove for the booty to ride in. I find all the booty does is hold the dirt in so I remove them which then allows removing both washers. I removed both on my own machine to aid turning. That was a long time ago. Now that I have the long travel front, I probably should experiment with putting them back.