Author Topic: Replacement FL350 Rear Fenders  (Read 17704 times)

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #15 on: August 03, 2010, 12:46:44 PM »
Now that the front fenders are in, pricing is listed for all four. For a limited time, the stainless brackets are the same price as the powder coated steel ones.

aircrftmec

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Re: Replacement FL350 Rear Fenders
« Reply #16 on: August 17, 2010, 08:02:06 PM »
Any work on the replacement tubs?
« Last Edit: August 18, 2010, 07:00:30 AM by aircrftmec »

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #17 on: August 18, 2010, 04:23:00 AM »
I had to go with a new company for the tubs that is capable of the deep draw. The mold is going to be cast aluminum with water cooling lines in it due to the size and depth. The mold will be made by yet another supplier. It will take longer than the fenders to coordinate everything.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #18 on: June 23, 2011, 12:19:54 PM »
People found the way to order a complete set of 4 fenders with the discounted pricing confusing so I split off into a separate listing: http://aftershockmotorsports.com/Honda-FL350R-Odyssey/Body/Complete-Set-Fenders

I am on about round 4 with getting tubs made. I will be packing up and ship off another tub with indications of changes to allow it to be thermo-formed. Price on a tub from Honda was around $450 10 years ago or whenever it was that you could still get one. It is looking like they will be similarly priced.

Kgeezyy5

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: Replacement FL350 Rear Fenders
« Reply #19 on: April 02, 2014, 10:52:59 AM »
Hello. I need rear
And front fenders. Any help u can offer???
Please email me at karissajlee@yahoo.com

Matt_Mc

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: Replacement FL350 Rear Fenders
« Reply #20 on: May 08, 2020, 04:41:45 PM »
Are these still avaliable? I'd like a full set

Hawksd1

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: Replacement FL350 Rear Fenders
« Reply #21 on: August 02, 2020, 10:11:21 AM »
I would like to buy a full set two fronts two rears with brackets..... cost and shipping to legrand ca 95333

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #22 on: August 30, 2020, 11:45:52 AM »
We have all the fenders, but missing one bracket for the rear fenders. The fixture to make that bracket needs to be made again as it was lost.

fl350_SLump13

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Re: Replacement FL350 Rear Fenders
« Reply #23 on: September 14, 2020, 09:13:34 AM »
any tubs?

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #24 on: September 15, 2020, 03:50:13 PM »
I did not have a mold made for tubs. I would be willing to make them if there was a pre-buy. It would go something like this, there would be a list of people who express interest, no money paid. When the list is long enough, everyone would pay. Once payments received, it would be likely about 3 months for the mold to get made, prototype verified then a production run. They would likely run $800 with center console. The design I did would allow the center console to work with a factory tub, but the new tubs would not work with the factory console. I can't make the locking tabs. This pre-buy setup is how the original water cooled head sale worked 20 years ago that ultimately launched Aftershock Motorsports.

I designed the new fender bracket die in CAD and half has been machined. The other half should be done soon. Another production run of fenders are currently being run and will be sent to Derek Tissenger in California. Fenders can be purchased from him or Aftershock, but Aftershock no longer accepts credit cards via phone. They can also be ordered from Derek and drop shipped from Michigan if closer and the shipping will be cheaper.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #25 on: September 28, 2020, 02:28:51 PM »
The missing fixture has been made. All fenders and brackets are now in stock.

LiveWire

  • Administrator
  • Hero Member
  • *****
  • Posts: 1024
  • Karma: 20
    • View Profile
    • 85 Honda Odyssey FL350 Parts
Re: Replacement FL350 Rear Fenders
« Reply #26 on: October 04, 2020, 10:42:47 AM »
Derek now has 25 sets of fenders at his shop in California. He has one set of brackets and another 10 will be on the way to him tomorrow. 661-747-5796