Author Topic: LT fl350 for sale in North Carolina  (Read 2313 times)

stone4x4

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
LT fl350 for sale in North Carolina
« on: December 23, 2013, 05:19:02 AM »
http://hickory.craigslist.org/sno/4215441890.html


1985 fl350 Honda odyssey electric start ,automatic transmission with f/r emergency brakes ,front and rear disc brakes it has a custom A-arm front suspension using trx450 components engine. full rebuild and has a new crank less than 20 hrs , has aftermarket aluminum fuel tank aluminum wheels with good tires Simpson camlock 4 point harness super bright led headlight. DG exhaust. New brakes. willing to trade for a nice motard or dual sport no 250's unless its a 2 stroke email for more info tags fl 350 400 pilot odyssey atv buggy rail mini gocart side by side utv

mcgyver331

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #1 on: June 08, 2014, 07:20:10 PM »
I bought that one. Bad move as the 20hr engine was crap. Traded for a decent suzuki samurai.

Good thing is I have parts and can build and fabricate. I'll post it some on here.

mcgyver331

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #2 on: June 13, 2014, 08:30:58 AM »





During inspection I have found the crank out of line, 2 bearings bad, balancer crank side gear minorly worn, on 82mm bore.

mcgyver331

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #3 on: June 14, 2014, 01:42:28 AM »
Decided to go bigger instead of trying to tune the 350. Motor went out of balance the other day and I tore into it. Crank was wobbling on both sides. cases had some repairs and the case halves were not matched very well. There was mix leaking out of it. There was my tuning issues. Crank was not new as far as I could tell. 82mm bore. Again not new or recently rebuilt?

This side was nice and dry.

Sadly this side was nice and dry too.
Bottom of the motor shows all.

Nice Running 128 compression + both cyls.

Fits like a glove. A fitted glove. Going to mess with isolated motor mounts and lower it a hair.

Next will be exhaust mods.

mcgyver331

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #4 on: June 15, 2014, 11:17:01 PM »


« Last Edit: June 16, 2014, 09:18:00 AM by mcgyver331 »

ZeroClient

  • Newbie
  • *
  • Posts: 33
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #5 on: June 16, 2014, 04:05:46 AM »
I know you said the 350 was crap, but just got my motor rebuilt with an 82mm. What compression did your 350 have, assuming the top end wasn't backyards as bad as the bottom?  Mind has 145 before seat/breakin now and I'm just wondering where it's going to go after break in.

Eric

mcgyver331

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #6 on: June 16, 2014, 08:38:13 AM »
my 350 was at 135 very powerful even with the leaks in the bottom end obviously could have been better. I still have the cylinder and piston. will need a hone and rings.

mcgyver331

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: LT fl350 for sale in North Carolina
« Reply #7 on: June 17, 2014, 10:02:31 PM »
Just finished up the motor mount. Any one want one?