Author Topic: FL350R  (Read 2244 times)

eriann123

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
FL350R
« on: December 12, 2009, 03:51:03 AM »
I'm looking for a CDI unit. My fl350 wont start with the push button it engages and everything but it wont turn it hard enough to start it but it pull starts at second or third pull. Some one suggested I replace CDI unit. :D

PilotHawK

  • Hero Member
  • *****
  • Posts: 616
  • Karma: 0
    • View Profile
FL350R
« Reply #1 on: December 13, 2009, 02:08:32 AM »
The starter is probably the source of your problems. You need to look into rebuilding/repairing it, and making sure all of your electrical connections are sound. Also you want to make sure your battery is in good condition. When the starter is full of oil or the brushes worn it draws too much power from the system and keeps the coil from making a strong enough spark.

Here is a link on rebuilding your starter.

http://g2buggy.g2-innovations.com/FL350/starter.htm

eriann123

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
FL350R
« Reply #2 on: December 13, 2009, 04:48:50 AM »
PilotHawK, Thanks for the load of info.
Now any tips for the pool starter not recoiling all the way in.?

Thanks again

turbotexas

  • Full Member
  • ***
  • Posts: 125
  • Karma: -6
    • View Profile
FL350R
« Reply #3 on: January 26, 2010, 07:18:18 AM »
The Manual will have a how to on the recoil...
Before I pulled the starter I would "jump start it with a good car battery to eliminate the possibility of just a weak ody battery!!!

And who ever told you the CDI was bad after it starts with the pull rope is someone I wouldn't take a whole lot of advise from...