Author Topic: Grounding your Digatron sensors  (Read 879 times)

digatech

  • Guest
Grounding your Digatron sensors
« on: August 05, 2005, 10:09:03 AM »
For your Digatron instrument to work correctly you need to insure that all sensors with ground leads are grounded to the engine block. The engine block is the ground for all the electrical for your engine. This ground can be different from the chassis ground, which may cause electrical noise (erratic reading) to be displayed on your instrument. So if you are getting erratic sensors reading always check to see that you have a good clean engine block ground.

Digatron Technical Support